G9 LED Bulbs, 4W (40W Equivalent), Warm White, Dimmable, No-Flicker - 10 Pack

G9 LED Bulbs, 4W (40W Equivalent), Warm White, Dimmable, No-Flicker - 10 PackG9 LED Bulbs, 4W (40W Equivalent), Warm White, Dimmable, No Flicker Pack of 10 Key Features Package Quantity: 10 bulbs Power Consumption: 4W Halogen Equivalent: 40W Luminous Flux: 400 lumens Color Temperature: Warm White (2700K) Base Type: G9 Bi Pin Voltage: 120V AC, 60Hz Dimmable: Yes, compatible with most LED dimmers Operation: Flicker free light output Color Rendering Index (CRI): >80 Replaces Cross Reference Part Numbers Direct replacement for

G9 LED Bulbs, 4W (40W Equivalent), Warm White, Dimmable, No-Flicker - Pack of 10

Key Features

• Package Quantity: 10 bulbs
• Power Consumption: 4W
• Halogen Equivalent: 40W
• Luminous Flux: 400 lumens
• Color Temperature: Warm White (2700K)
• Base Type: G9 Bi-Pin
• Voltage: 120V AC, 60Hz
• Dimmable: Yes, compatible with most LED dimmers
• Operation: Flicker-free light output
• Color Rendering Index (CRI): >80

Replaces / Cross-Reference Part Numbers

• Direct replacement for standard 25W, 35W, and 40W G9 base halogen bulbs.
• Interchangeable with T4-style G9 capsule bulbs.

Compatibility & Fitment

• Designed for all fixtures with a standard G9 bi-pin socket.
• Commonly used in chandeliers, wall sconces, vanity lights, and under-cabinet puck lights.
• For dimming, requires an LED-compatible dimmer switch to prevent flickering and ensure smooth operation.
• Not intended for use with incompatible, older-style halogen or incandescent dimmers.

When to Replace

• Existing bulb is burned out or fails to illuminate.
• Light output is inconsistent, strobing, or flickering.
• Bulb has become significantly dimmer over time.
• To upgrade from inefficient halogen bulbs to reduce energy consumption and heat output.

Installation Tips

• Turn off electrical power at the source before replacing the bulb.
• Allow the previous bulb to cool completely before handling.
• Hold the new bulb by its ceramic base, not the clear capsule.
• Align the pins and push the bulb straight into the socket until fully seated. Do not twist.
• Restore power and test functionality, including the full range if connected to a dimmer.